Can we repair pen and SD cards that are not working? 🌚
This is a question that many people have, the answer is both yes and no 🙃. It varies relatively...😁
This is how you think now, if there is a problem in the circuit, most of the time it is the problem in the power MOSFET of the pen.
But that's not what I'm here to tell you about... 90% of people say that Pen/SD cards don't work, and when you plug them in, an error comes up and tells you to format the pen/SD card. But they don't even let you format. Right...?) So people who don't know throw away the pen 🤦 ♂️ Either remove it 😁.. Well, with the method I'm going to show you today, you can fix any pen / SD card that doesn't work that way 🌚
So guys, take pens and SD cards that you don't do at home and get ready ⚙️🔨
🪤 You need a laptop or a PC for this, and you don't need any additional software for this. We do the entire work in cmd.
We are going to do this to clean your device 👾
⚜️Remember that cleaning and formatting are 2,
• Even if you format a pen/SD card, there are many ways to get back the deleted things (I'll tell you about that later🌚)
But when you clean a storage device, you can't get anything back like you bought a new one.💯
♻️ Now plug your storage device into the PC / Laptop. Close all error messages and open cmd
♻️ After that, you have to type these commands one by one in capital letters and enter.
👇
1. DISKPART 👀 [ You will be asked to open the diskpart.exe application then give ok ] (Some will open automatically)
2. LIST DISK
3. SELECT DISK (here you need to clean from the disk number shown to you after the previous command and give the disk number)
4. CLEAN
5. CREATE PARTITION PRIMARY
6. ACTIVE
7. FORMAT FS=FAT32 (This will take some time to be 100% but 😁 )
8. EXIT
Our work is over
Now when you go to This PC, you can see that your Pen/SD card is clean. 😌 You can fix 99% of the errors in storage devices with this method.🙃
Important 📍
Now don't hold your nose that curred SD cards (burnt ones) can't be repaired with this, 🥲 After an SD card is curred we can't do anything to repair it... It means that the chipset in it is burnt. Even when plugged together, no error messages or anything comes out, sometimes it starts to get hot for a moment without showing anything.
Bonus point 📍
If you are selling a pen/SD card that you have used to put your personal things to someone or if you are buying a used one, you must clean the storage device and use it as I said, or sell it. Then he won't show your previous data and if there are any such things on his device, it will all be removed 😌😗📍
0 Comments